Scroll saws tend to be overlooked in favor of bigger, sharper and flashy-looking cutting tools, but they are actually an extremely convenient way to slice very precise curves and designs into a sturdy material. They act a little bit just like a sewing machine, using a vertical blade that allows for much faster modifications compared to a regular hand saw, with the added bonus of being much faster than manual cutting.
Of program, like all tools, scroll saws come in a wide range of shapes and sizes. Tracking down the best scroll saw for your needs isn’t as simple as buying the first model you find, and it is important to look at more than one brand.
Below are 10 Best Scroll Saws we could find for general-purpose cutting, as well as their specific features and what makes them stand out from other saws on the market.
Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
Variable speed goes from 400 to 1600 strokes per minute
Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
This uniquely-designed bi-directional saw can deliver between 400 and 1,600 cuts per minute depending on the settings and materials used, making it perfect for both careful cuts or ripping through softer materials. The 11-inch by 16-inch cutting table can be beveled to the left by up to 45 degrees, making angled cuts much easier and offers a 16-inch throat depth with the ability to slice through up to two inches of wood (or similar material) at a time. Not only that, but you don’t even need tools to swap out the blades – it uses a thumbscrew system that can be loosened and tightened yourself.
Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
This variable-speed scroll saw runs on a special couple of parallel arm links to significantly cut down the quantity of vibration you will feel to permit for more precise cuts, along with reducing the entire noise degree of the saw. The easy on/off change and electronic speed configurations give you complete control over its behavior, as the built-in dirt blower makes it simple to very clear the cutting desk in seconds. Because of the clamp style used to carry the blade set up, you can easily replace the existing blade without requiring any extra tools, and you will actually lift the arm for extra slicing precision.
Up-front dial allows setting the exact cutting speed choice for processing different materials, Cast aluminum work table tilts 0° to 45° left with up-front locking knob and bevel scale
"First to market" and design Flex-neck LED work light, Patented blade holder accepts both standard 5 in. pin-end or plain-end (pinless) scroll saw blades, Side storage compartment on the housing for spare blades and wrenches
The dial-based adjustment system of the scroll saw makes it simple to find the exact cutting speed and rate you will need, allowing it to undertake a huge selection of materials without feeling as well under-or-over-powered to do the work properly. The 16-in. throat depths and 2-inch cutting size imply that you can easily cut through large bits of wood and metallic with ease, as the flexible sawdust blower assists clean the cutting desk quickly.
Additionally, there is another flexible tool – an LED light, which you can use to highlight key areas to make cutting and trimming different materials much easier in less-than-ideal lighting conditions.
Includes a gooseneck work light, dust blower and dust port
Plain or pin blades
No load speed: 550-1700 SPM
This variable-speed scroll saw uses a 1/8 horsepower motor to provide consistent cutting power on almost any material. The design allows for both regular and pin-end blades, giving you a choice of how to cut different items, while the 16-inch cutting width allows you to slice through large pieces of wood or metal with ease. Its high overall speed (reaching up to 1700 SPM) ensures that it won’t jam easily, and the included dust blower and adjustable work light help you keep your workspace clear and visible if you are creating a lot of sawdust of metal shavings in a darker environment.
Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
This heavy-duty scroll saw includes a special arm style that can reduce its overall vibrations and noise output while cutting, along with permitting you to raise it up to improve the blade on the fly. The look is meant to be tool-free if you don’t are making repairs, and therefore you don’t have to maintain a screwdriver around to create small modifications or swap out the blades: not just that, however, the entire cutting deck can bevel by 45 degrees to both left and the proper, making angled cuts extremely easy and consistent.
Large aluminum 20" x 12 5/8" dual tilting table allows for bevel cutting up to 45 degrees
Patented table top bevel scale for accurate and convenient readings
Tool-less blade holder makes quick and easy 5" pin or plain end blade changes
Built-in adjustable LED work lamp for better illumination of work area
Variable speeds between 500 and 1500 SFM with upfront control knob
This stand-based scroll saw runs on the full-sized frame that lets it operate on its own, and will be offering up to 45 examples of bevelling without becoming unstable or slipping over. The blade holders could be exposed without needing any equipment, and therefore adjusting or changing the blade is fast and simple – not just that, but it works together with both regular or pin-end blades, providing you two various ways of slicing through various materials. Because of the built-in function lamp, you may also highlight crucial areas while slicing or brighten up the task area in darker circumstances.
Integrated dust removal system keeps cutline free of debris
Articulating LED worklight ensures that the work piece is clearly lit.1.5 inches Dust port keeps work area clear of dust
Electronic variable speed control helps cut a variety of materials
Tilting 16" x 10" work table tilts 0-45 degrees for precise cuts
16" throat allows for cutting thicker pieces
This scroll saw includes a built-in dust particle removal system that can get rid of any dust in the way of your cutting path, making it far easier to create accurate cuts without having to constantly clean the surface. It can bevel by up to 45 degrees for a range of angled cuts and has a 16-inch throat depth for slicing apart thicker pieces of wood, metal, or other materials. The adjustable work light provides extra visibility in dark areas, as well as making most cuts clearer and easier to perform in low-light areas.
NEW! Upper and lower blade guard assembly helps prevent accidental hand contact with the blade, NEW! Switch protection device to prevent unintentional start-up, NEW! Dust collector table kit for direct dust extraction hook-up.
Unique Head tilting- 38° left and 45° right (not table tilting), Keeps the workpiece level for better control and more accurate cuts.
Raise or lower the mounting position of the blade, Blade tilt range - 38 degree left & 45 degree right
This 21-inch-throat scroll saw has specially-designed blade guards that protect the user from harm, as well as dust protection to ensure that none of the internal parts can get damaged by sawdust. Unlike a lot of scroll saws, the blade is the part that bevels, tilting up to 45 degrees (or 30 degrees when tilted to the left). The wide, flat cutting surface area makes it simple to slice large items up, and the built-in dust blower implies that it is simple to clean it in-between cuts – not just that but changing the blades can be an entirely tool-free job.
Dust port adapter keeps line-of-sight clear and work space clean
Auto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
Detachable coping function for handheld use to take the tool to the work piece
Variable-speed control for optimal cutting in a variety of materials
Fast-clamp base attaches to various tables, benches and surfaces
Blue edge guide locking levers illustrated on packaging are not included in the kit and do not affect performance of the tool
This compact variable-speed saw comes with an unusual design that means it is ideal for cutting things on the run, having a detachable main body that may keep the cutting table behind. Because of the fast-clamp system, it is simple to connect it to an array of benches and operating areas, and the quick-change system helps it be incredibly easy to displace the blade if it wears out or must be swapped for a different type. Furthermore, the tool also offers a dust slot adapter that will keep your project area clear and makes it easier to focus on making careful cuts.
1.2-Amp Induction Motor for Quiet, Smooth Performance
Quick-Change Blade System. Includes: 2 blades and allen key
Variable Speed for Versatility 400-1600 SPM
Flexible dust blower keep cutting line clear
Includes: 2 blades and allen key
This scroll saw boasts a very quiet 1.2 amp motor that offers smooth and consistent performance, even while cutting thick materials, with a speed range of around 400 to 1600 SPM. Thanks to its built-in dust blower, you can keep the cutting area clear even if you are creating a lot of dust and shavings, and the speed settings make it easy to adjust the amount of power being used on every cut. The blades also use a quick-change system that makes it extremely easy to replace them whenever it is necessary, speeding up the process significantly.